|
|
|
|
|
Turbine
Caps, Cap Pullers and Tools for
SuperSonic MAS Spinners - 5 mm or 7
mm
|
SuperSonic
(SS) and XC
rotors and caps, are different.
If unsure, check the rotor length to
confirm that you need SS parts.
5 mm SS (length
= 14.93 mm), Sample – 56 μL to 110 μL
7 mm SS (length = 22.10
mm), Sample – 215 μL to 360 μL
|
Caps for
THICK Wall Rotors - fastest spinning
SuperSonic
(SS) and XC rotors and caps are different.
The exception, short XC
and SS caps are interchangable, noted -- XC/SS.
|
5 mm
SS Part#
|
|
|
Description
|
Price
(US $)
|
Kel-F
Caps
|
96432 |
|
96462
|
XC/SS
Kel-F Short Thick Cap Pair
|
155
|
96844 |
|
96463
|
SS Only, Kel-F Long Thick
Cap Pair
|
155
|
|
GFT (Glass filled Torlon) Caps
|
99822
|
|
99816
|
XC/SS GFT Short Thick Cap Pair
|
175
|
Aurum
Caps
|
96457
|
|
96466
|
XC/SS Aurum Short Thick Cap Pair
|
175
|
O-Ring
Caps
|
----
|
|
96468
|
SS Kel-F O-Ring Cap Pair
|
250
|
----
|
|
96469
|
SS Aurum O-Ring Cap Pair
|
250
|
Caps
for THIN Wall Rotors
SuperSonic (SS) and XC rotors
and caps are different.
The exception, short XC and SS caps are interchangable, noted -- XC/SS.
|
5 mm SS Part#
|
|
7 mm
SS Part#
|
Description
|
Price
(US $)
|
Kel-F
Caps
|
96434
|
|
96464
|
XC/SS Kel-F Short Thin Cap Pair
|
155
|
|
GFT (Glass filled Torlon) Caps
|
99824 |
|
99817 |
XC/SS GFT Short Thin Cap Pair
|
175 |
Aurum
Caps
|
99834 |
|
96465 |
XC/SS Aurum (or Torlon*) Short Thin Cap Pair |
175 |
|
Torlon Caps |
96472 |
|
90613 |
SS Only, Torlon
Long Thin Cap Pair
|
175 |
Cap
Pullers and Accessories
|
5 mm
SS Part#
|
|
7 mm
SS Part#
|
Description
|
|
Cap
Pullers
|
96182
|
|
96360
|
XC/SS Puller for Turbine Caps
|
210
|
----
|
|
96170
|
Blue Threaded Cap Puller for
O-ring Caps
|
110
|
|
Rotor Holder
|
06019 |
|
06023 |
Rotor Holder –
use
with plungers below
|
45 |
Plungers
|
06021 |
|
43761 |
Plunger - thick wall
- to push out caps
or sealing cells
|
35 |
06022 |
|
42039 |
Plunger - thin wall-
to push out caps or sealing
cells
|
35 |
Sample Packing
Sets |
96509 |
|
96510 |
SS Sample Packing Set for Thick Wall Rotors |
160 |
96515 |
|
96517 |
SS Sample Packing Set for Thin Wall Rotors |
160 |
* Aurum is the normal material for this part, however, Torlon has
very similar NMR properties and may be substituted if Aurum is not
available.
(Prices
listed are USA prices. Foreign prices are higher, plus taxes.)
If
unsure of correct supplies, contact us with the probe DSI-serial
number.
Note:
Thick
wall rotors and GFT or Aurum caps are provided for fastest
spinning and ease in packing. Thin wall rotors and caps
are available for maximum signal to noise. The maximum speed of
thin wall rotors is about 50% the maximum speed of thick wall rotors. Long
caps are provided for highest homogeneity and rf field strength.
Notes for XC probes built prior
to 2000:
- For XC probes
(beginning in 2000) XC "Slow MAS" has
been provided for stable very slow spinning of tissues, liquids, and
CC by a change in "nozzle caps" only. The same
turbine caps are used. All choices of XC rotors and caps
may be used with slow spin nozzle caps. A 50% reduction in maximum
spinning
speeds
should be expected for each type. See our XC
Probes page for more information. Note: If
your probe was provided with special slow spin turbine caps, contact
us at Doty before reordering.
- Probes
ordered for slow or fast only can be upgraded to do both .
Please
contact accessories@dotynmr.com with
questions.
|
