High-Speed
Series MAS Spinner Accessories
For
5 mm and 7 mm High-Speed MAS
•
Thick wall rotors are provided for fastest spinning and
ease in packing. Thin wall rotors and short caps are provided for
maximum signal to noise. Long caps are provided for highest homogeneity
and rf field strength. Long caps are also for limited samples. Please
refer to the rotor main page for
materials information.
• High
Speed, SuperSonic, XC, DI, and Standard accessories are not interchangeable
unless specified. If unsure about correct supplies, contact us with
the probe DSI-serial number and we can help. Note: SuperSonic rotors
may be used in High Speed spinners, but High Speed rotors will not
work in SuperSonic
spinners.
5
mm High Speed
Rotor length-
14.93 mm
Spinning
speed -
max.
14 kHz,
Sample
volume –
57 μL to
95 μL |
Turbine
Cap Design
|
7
mm High Speed
Rotor length-
22.10 mm
Spinning
speed –
max.
9 kHz,
Sample
volume – 240 μL
to 370 μL
|
Part
# |
Price
|
Description
|
Part
# |
Price
|
Thick
Wall Rotors
|
13260
|
$600 |
Silicon
Nitride Rotor
|
13860
|
$600 |
13270 |
425 |
Zirconia
Rotor
|
13870
|
425 |
13280
|
250 |
Macor
Rotor
|
13880
|
250 |
End
Caps for Thick Wall Zirconia and Silicon Nitride
Rotors
|
97780
|
110 |
Kel-F
Short Cap Pair
|
97830
|
110 |
97810
|
110 |
Kel-F
Long Cap Pair
|
97860
|
110 |
97790
|
120 |
Aurum (or Torlon*) Short Cap Pair
|
97840
|
120 |
97820
|
120 |
Aurum
Long Cap Pair
|
97870
|
120 |
96446
|
210
|
Kel-F
O-Ring Cap Pair **
|
96447
|
210
|
96900
|
210
|
Aurum
O-Ring Cap Pair**
|
96448
|
210
|
End
Caps for Macor Rotors
|
13291
|
105 |
Kel-F
O-Ring Rear Turbine for Macor Rotor ** |
13531
|
105 |
13680
|
105 |
Aurum
O-Ring Rear Turbine for Macor Rotor ** |
13533
|
105 |
Thin
Wall Rotors
|
42384 |
660 |
Silicon
Nitride Rotor
|
13856
|
660 |
42238
|
450 |
Zirconia
Rotor
|
42237
|
450 |
End
Caps for Thin Wall Zirconia and Silicon Nitride
Rotors
|
96485
|
110 |
Kel-F
Short Cap Pair
|
96481
|
110 |
96486
|
110 |
Kel-F
Long Cap Pair
|
96482
|
110 |
96487
|
120 |
Aurum
Short Cap Pair
|
96483
|
120 |
96488
|
120 |
Aurum
Long Cap Pair
|
96484
|
120 |
Cap
Pullers and Accessories
|
94810
|
230 |
Kel-F
Front Housing Cap
|
94790
|
220 |
94820
|
310 |
Kel-F
Back Housing Cap
|
94800
|
310 |
7130
|
30 |
Kel-F
Housing Thumb Screws (priced per pair) |
7130
|
30 |
96360
|
175 |
Puller
for Long and Short Kel-F, Vespel, Torlon, or Aurum Caps
|
96310
|
175 |
96190
|
110 |
(5
mm) Black Threaded End-Cap Puller for O-ring Caps (4-48 Thread)
|
------ |
------
|
------ |
------
|
(7
mm) Gray Threaded End-Cap Puller for O-ring Caps (6-40 Thread)
|
96180
|
110 |
96530
|
160 |
Sample
Packing Tool Set for Thick Wall
|
96540
|
160 |
96514
|
160 |
Sample
Packing Tool Set for Thin Wall
|
96516
|
160 |
* Aurum is the normal
material for this part, however, Torlon has very similar NMR properties
and may be substituted if Aurum
is
not
available.
** Specify on the order. Some prefer to
insert (or remove) o-ring turbines by
twisting them in by hand. However, o-ring turbine caps can be ordered
with threaded holes to be inserted and removed
with the threaded cap puller. Or front turbine caps can also
be ordered with an axial
out-gassing hole for higher temperature work or to remove
air bubbles.
O-ring caps can be used for liquids, for sealing, or for some VT.
(Prices
Listed are USA prices. Foreign prices are higher, plus taxes)
If
unsure about correct supplies, contact us with the probe DSI-serial
number.
Please
contact accessories@dotynmr.com with
questions.
|
