Standard
Series MAS Spinner Accessories
For
5 mm and 7 mm Standard MAS
Short
caps are provided for maximum signal to noise. Long
caps are provided
for highest homogeneity and rf field strength. Long caps are also for
limited samples. Please refer to the rotor
main page for materials
and temperature information.
• Standard,
High Speed, SuperSonic, XC, and DI accessories are not interchangeable
unless specified. If unsure about correct supplies, contact us with
the probe DSI-serial number and we can help.
5
mm Standard
Rotor length – 13.08
mm
Spinning
speed max. –
9 kHz
Sample
volume –
60
to 110 μL
|
Turbine
Cap Design
|
7
mm Standard
Rotor length – 18.31
mm
Spinning
speed max. –
6 kHz
Sample
volume –
200
to 350 μL
|
Part
# |
Price
|
Description
|
Part
# |
Price
|
Rotors
|
5511
|
$
475 |
Silicon
Nitride Rotor
|
7511
|
$
475 |
5520
|
330 |
Zirconia
Rotor
|
7520
|
330 |
5900
|
250
|
Macor
Rotor
|
7900
|
250
|
End
Caps for Zirconia and Silicon Nitride Rotors
|
97650
|
80 |
Kel-F
Short Cap Pair
|
97500
|
80 |
97660
|
80 |
Kel-F
Long Cap Pair
|
97510
|
80 |
96518
|
50 |
Kel-F
Spherical Sample Cell Insert Pair for CRAMPS Experiments
(Use
with long Kel-F caps) |
------
|
--------
|
97680
|
90 |
Aurum Short Cap Pair
|
97530
|
90 |
97690
|
90 |
Aurum
Long Cap Pair
|
97540
|
90 |
96443
|
155 |
Kel-F
O-Ring Cap Pair*
|
96435
|
155 |
97940
|
155 |
Aurum
O-Ring Cap Pair*
|
96445
|
155 |
End
Caps for Macor Rotors
|
5980
|
45 |
Kel-F
Plug Cap for Macor Rotor |
------ |
------
|
5990
|
45 |
Teflon
Plug Cap for Macor Rotor |
------ |
------
|
5572
|
105 |
Kel-F
O-Ring Plug Cap
for Macor Rotor
|
7541
|
105 |
----- |
|
Aurum
O-Ring Plug Cap for Macor Rotor
|
7542
|
105 |
Cap
Pullers and Accessories
|
5170
|
155 |
Kel-F
Front Housing Cap
|
7170
|
155 |
7130
|
30 |
Kel-F
Housing Thumb Screws(priced
per pair)
|
7130
|
30 |
96220
|
175 |
Puller
for Long and Short Kel-F, Vespel, Torlon, or Aurum Caps |
96240
|
175 |
96170
|
110 |
5
mm Blue Threaded End Cap Puller for O-ring Cap Pairs and
for
Caps for Macor Rotors, (2 - .4 mm Thread) |
------ |
------
|
------ |
------
|
7
mm Red Threaded End-Cap Puller for 7 mm O-ring
Caps, (5-44 Thread)
|
96250
|
110 |
------ |
------
|
7
mm Black Threaded End-Cap Puller for Macor o-ring plug caps for Macor Rotors, (4-48 Thread) |
96190
|
110 |
96500
|
160 |
Sample
Packing Tool Set for Silicon Nitride and Zirconia Rotors |
96520
|
160 |
| 4710
|
50 |
Packing
Tamp for Caps with Axial Screws |
4700
|
50 |
* Specify
on the order. Some prefer to insert
(or remove) o-ring turbines by twisting them in by hand. However, o-ring
turbine caps can be ordered with threaded holes to
be inserted and removed
with the threaded cap puller. (Plug caps must be removed with the threaded
tool.) Or front turbine caps can also be ordered with an
axial out-gassing hole for higher temperature work or
to remove air bubbles. O-ring caps can be used for
liquids, for sealing, or for some VT.
(Prices
listed are USA prices. Foreign prices are higner, plus taxes.)
If
unsure about correct supplies, contact us with the probe DSI-serial
number.
Please
contact accessories@dotynmr.com with
questions.
|
