Products

High-field MRI Coils
     Head RF
     Knee RF
     Small-Animal RF Platform
     Small- Animal RF Modules
     Vertical Bore Imaging
     Surface Coils
     MRI 3 Axis Gradient Coils
     Head Gradients R&D
Solids NMR Probes
     OptiMAS Low E
     XC MAS Probes Low E
     High Temperature MAS
    SAS Switched Angle
     Non-spinning NMR Probes
     Cryo-Coil MAS
Liquids NMR Probes
Diffusion/PFG Probes
Supplies and Accessories
     Probe Controllers
     Rotors and Caps
     Susceptibility plugs
 

Printable pdf
XC & SS Accessories

Rotors for
XC and SuperSonic (SS) MAS Spinners

4 mm, 5 mm, and 7 mm

Click here for XC and SS turbine caps.

Click here
for sealing cells for use with XC rotors…

XC Rotors
Note* Please refer to Spinning Speeds/density charts and material information.
Part #
Price (US $)
Description
Low Density* Spinning maximum (in kHz)
4 mm XC4 (length = 20.95 mm), Sample – 66 μL to 124 μL  
# 43255
800
Silicon Nitride XC4 Thick Wall Rotor
24
# 43483
620
Zirconia XC4 Thin Wall Rotor
11
5 mm XC5 (length = 22.25 mm), Sample – 82 μL to 201 μL
 
# 13265
800
Silicon Nitride XC5 Thick Wall Rotor
18
# 13266
560
Zirconia XC5 Thick Wall Rotor
13
# 13267
875
Silicon Nitride XC5 Thin Wall Rotor
16
#13268
620
Zirconia XC5 Thin Wall Rotor
9
7 mm XC7 (length = 29.00 mm), Sample – 241 μL to 564 μL
 
# 43526
800
Silicon Nitride XC7 Thick Wall Rotor
12
# 43528
560
Zirconia XC7 Thick Wall Rotor
8
# 43527
875
Silicon Nitride XC7 Thin Wall Rotor
11
# 43529
620
Zirconia XC7 Thin Wall Rotor
7

  (Prices listed are USA prices. Foreign prices are higher, plus taxes.)

SuperSonic (SS) Rotors
Note* Please refer to Spinning Speeds/density charts and material information.
Part #
Price
(US $)
Description
Low Density* Spinning maximum (in kHz)
5 mm SS (length = 14.93 mm), Sample – 56 μL to 110 μL  
# 13251
600
Silicon Nitride 5 mm SS Thick Wall Rotor
18
# 13252
425
Zirconia 5 mm SS Thick Wall Rotor
13
# 42388
650
Silicon Nitride 5 mm SS Thin Wall Rotor
16
# 42396
450
Zirconia 5 mm SS Thin Wall Rotor
9
7 mm SS (length = 22.10 mm), Sample – 215 μL to 360 μL
 
# 13857
600
Silicon Nitride 7 mm SS Thick Wall Rotor
12
# 13858
425
Zirconia 7 mm SS Thick Wall Rotor
8
# 13859
650
Silicon Nitride 7 mm SS Thin Wall Rotor
11
# 13861
450
Zirconia 7 mm SS Thin Wall Rotor
7

  (Prices listed are USA prices. Foreign prices are higher, plus taxes.)

1. Thick wall rotors and GFT or Torlon caps are provided for fastest spinning and ease in packing.  Thin wall rotors and caps are available for maximum signal to noise. The maximum speed of thin wall rotors is about 50% the maximum speed of thick wall rotors. Long caps are provided for highest homogeneity and rf field strength.

2. For XC probes (beginning in 2000) XC "Slow MAS" is provided for stable very slow spinning of tissues, liquids, and CC by a change in "nozzle caps" only. The same turbine caps are used. All choices of XC rotors and caps may be used with slow spin nozzle caps. A 50% reduction in maximum spinning speeds should be expected for each type. See our XC Probes  page for more information.

 

3. Probes ordered for slow or fast only can be upgraded to do both .

4. XC, DI, SuperSonic, High Speed, and Standard accessories are not interchangeable unless specified. If unsure about correct supplies, contact us with the probe DSI-serial number and we can help. Please refer to rotor home page for materials information.

For 10 mm and 14 mm MAS accessories, please click here

 

Note 1: We have also made changes in 4 and 5 mm XC and SS turbine caps to further improve spinning stability. The XC/SS thick wall Kel-F caps and XC/SS thin wall rotor caps of all materials will have 7 flutes.

Note 2: New parts have been introduced. The XC4 extended VT caps will not have an axial screw. Contact the Doty Scientific sales staff for questions or to order these parts.

Note 3: If your probe was provided with special slow spin turbine caps, contact us at Doty before reordering.

If unsure of correct supplies, contact us with the probe DSI-serial number.

  Please contact accessories@dotynmr.com with questions.