|
|
|
Turbine
Caps, Cap Pullers and Tools for
XC MAS Spinners - 4 mm, 5 mm, or 7
mm |
|
XC
and SuperSonic (SS) rotors and caps, are different.
If unsure, check the rotor length
to confirm that you need XC parts.
4 mm XC (length = 20.95
mm), Sample – 66 μL to 124μL
5
mm XC (length
= 22.25 mm), Sample – 82μL to 201μL
7 mm XC (length = 29.00 mm), Sample – 241μL
to 564 μL
|
|
|
Click
below for:
XC
and SS rotors
MAS spinning
speed charts
Materials information. |
Caps for THICK
Wall Rotors - fastest spinning
XC and SuperSonic
(SS) and rotors and caps are different.
The exception, short XC and SS caps are interchangable, noted -- XC/SS.
|
XC4 Part# |
|
|
Description |
Price
(US $) |
Kel-F
Caps |
99705 |
96432 |
96462 |
XC/SS
Kel-F Short Thick Cap Pair
|
155 |
99702 |
99844 |
99637 |
XC Only Kel-F Long Thick Cap Pair
|
155 |
| GFT (Glass filled
Torlon) Caps |
99684 |
99822 |
99816 |
XC/SS GFT Short Thick Cap Pair
|
175 |
99685 |
99821 |
---- |
XC Only GFT Long Thick
Cap Pair
|
175 |
Aurum
Caps |
96431 |
96457 |
96466 |
XC/SS Aurum Short Thick
Cap Pair
|
175 |
96433 |
99839 |
99641 |
XC Only Aurum
(or Torlon*) Long Thick Cap Pair |
175 |
Caps
for THIN Wall Rotors
XC
andSuperSonic
(SS) rotors and caps are different.
The exception, short XC and SS caps are interchangable, noted -- XC/SS.
|
XC4 Part#
|
|
7 mm
XC Part#
|
Description
|
Price
(US $)
|
Kel-F
Caps
|
99699
|
96434
|
96464
|
XC/SS Kel-F Short Thin Cap Pair
|
155
|
99697
|
99835
|
99635
|
XC Only Kel-F Long Thin
Cap Pair
|
155
|
|
GFT (Glass filled Torlon) Caps
|
99686 |
99824 |
99817 |
XC/SS GFT Short Thin Cap Pair
|
175 |
99687 |
99823 |
---- |
XC Only GFT Long Thin Cap
Pair
|
175 |
Aurum
Caps
|
99722 |
99834 |
96465 |
XC/SS Aurum (or Torlon*)
Short Thin Cap Pair |
175 |
99723 |
99833 |
99636 |
XC Only Aurum (or Torlon*)
Long Thin Cap Pair |
175 |
Cap
Pullers and Accessories
|
XC4 Part#
|
5 mm
XC Part#
|
7 mm
XC Part#
|
Description
|
Price
(US $)
|
Cap
Pullers
|
96182
|
96182
|
96360
|
XC/SS Puller for Turbine Caps
|
210
|
|
Rotor Holder
|
01026 |
06019 |
06023 |
Rotor Holder – use
with plungers below
|
45 |
Plungers
|
01028 |
06021 |
43761 |
Plunger - thick wall
- to push out caps
or sealing cells
|
35 |
01029 |
06022 |
42039 |
Plunger - thin wall-
to push out caps or sealing
cells
|
35 |
Sample Packing
Sets |
99683 |
96511 |
96113 |
XC Sample Packing Set for Thick Wall Rotors |
160 |
99682 |
96513 |
96114 |
XC Sample Packing Set for Thin Wall Rotors |
160 |
* Aurum is the normal material for this part, however, Torlon has
very similar NMR properties and may be substituted if Aurum is not
available.
(Prices
listed are USA prices. Foreign prices are higher, plus taxes.)
If
unsure of correct supplies, contact us with the probe DSI-serial
number.
Note:
Thick
wall rotors and GFT or Aurum caps are provided for fastest
spinning and ease in packing. Thin wall rotors and caps
are available for maximum signal to noise. The maximum speed of
thin wall rotors is about 50% the maximum speed of thick wall rotors. Long
caps are provided for highest homogeneity and rf field strength.
-----------------------------------------------------------------------------------
Notes for XC probes built prior
to 2000:
- For XC probes
(beginning in 2000) XC "Slow MAS" has
been provided for stable very slow spinning of tissues, liquids, and
CC by a change in "nozzle caps" only. The same
turbine caps are used. All choices of XC rotors and caps
may be used with slow spin nozzle caps. A 50% reduction in maximum
spinning
speeds
should be expected for each type. See our XC
Probes page for more information. Note: If
your probe was provided with special slow spin turbine caps, contact
us at Doty before reordering.
- Probes
ordered for slow or fast only can be upgraded to do both .
Please
contact accessories@dotynmr.com with
questions.
|
